Muslim Bayudi - Basic box constructed of 1/2 "mahogany plywood for the sides, rear, top, and bottom, and 1/4" mahogany plywood to the front. Size 13 "x 19" with the sides sitting on the bottom board. Musical Front and rear covers the widest and highest dimensions. Cut a 4 "hole in the back. Once the fruit is cut and fit, apply wood glue and clamp the side, rear, top, and bottom together. Round all sides except the bottom
by hand or with a router. A set of key guitar makes tensioning A and D strings guitar easy. Key pairs so that they almost touch the inside of the back with the first key about 8 "from the top. Glue one flush "x 1" piece of wood to the front rail. Music drill hole near the top and sides of the guitar strings. Starting 3 "from the side and a 1" apart from above. Drill holes in accordance with the distance to the side keys. Left is the back of the lock in place. At the top is the top. Right-string guitar. Use the button to tension and "tune" the strings. The strings are in direct contact with the front. A little experimentation will give you the sound you are looking for. Below left shows the string on the button. Note they are also associated with the added effect of the snare.
It is finished with brass screws Cajon spaced 2 ". Upper left without screws. Complete Cajon with wood stain. With the loss of a little brass screws, string tension can be changed to provide a different snare sound. You also may want to add a small tambourine which sometimes can be played with one hand while the other drums. The cost for all materials of less than $ 50 US
Subscribe to:
Post Comments (Atom)
0 Response to "How To Make A Cajon"
Post a Comment